The Retrograde Drill is an orthopedic surgical instrument designed for controlled drilling applications. The 602026 series includes four configurations, Drill I, Drill II, Drill III, and Drill IV, providing different working lengths, diameters, and distal working-end configurations.
The Retrograde Drill series is available with working lengths of 220 mm and 270 mm. Depending on the selected model, available diameters include 7 mm, 7.5 mm, 8 mm, 8.5 mm, 9 mm, and 10 mm.
Drill I is available with a 270 mm working length and diameters ranging from 7 mm to 10 mm, including 7.5 mm and 8.5 mm options. The working-end diameter is Ø3.5 mm.
Drill II has a 220 mm working length and is available with 7 mm, 8 mm, 9 mm, and 10 mm diameter options. The working-end diameter is Ø3.5 mm.
Drill III has a 270 mm working length with 7 mm, 8 mm, 9 mm, and 10 mm diameter options. The working-end diameter is Ø4.0 mm.
Drill IV has a 220 mm working length and is available with 7 mm, 8 mm, 9 mm, and 10 mm diameter options. The working-end diameter is Ø4.0 mm.
The different configurations allow the Retrograde Drill to be selected according to the required working length, diameter, and working-end configuration for the intended orthopedic procedure.
Each Retrograde Drill is identified by an individual code number for product selection and ordering. The series can be supplied to orthopedic instrument distributors, medical device companies, and healthcare equipment providers.
Well Trust supplies orthopedic surgical instruments and related medical device products for professional distribution and healthcare equipment applications.
Please confirm the required model, working length, diameter, and configuration before ordering.
Note: Product specifications may vary by model. Please refer to the specification table for the corresponding model information.
